Visibility is among the most important considerations when it comes to driving, especially when it rains or snows.

That’s why you need a pair of functional wiper blades to keep you safe and these should be replaced at least twice a year.

Sounds easy enough right? While it seems fairly straightforward, it really isn't. Even with ordinary wipers, putting in a new wiper blade can turn out to be more difficult than you bargained for.

That’s why today we’ll take a look at the perfect one-step solution for replacing windscreen wipers.

Changing your wipers is quite a process from choosing the correct one to actually changing it. Here’s the process you have to follow:

The windscreen wiper blade assembly on your vehicle is made up of three basic components:

• The lower part that’s joined to the bottom of the windscreen, called the wiper arm.

• A metal frame joined to the arm with a metal retaining clip, hood, or pin on one end.

• The blade that’s responsible for wiping the screen clean.

To get the right size, you need to find new wiper blades that fit perfectly with the whole mechanism.

Now here’s the problem, you need to measure the exact length of your current wiper blades. If you’re off even by a few centimetres, it won’t fit.

The other issue you’ll encounter is that one blade will typically be a few centimetres shorter than the other making it more confusing to choose the perfect pair of wiper blades.

You also have to consider the replacement mechanism on the wiper arm. Some cars use a hook while others have a pin mechanism.

Once you’ve gone through the hassle of choosing the right windscreen wipers. It’s time for another one—fitting the wiper blade refills.

1. Switch on the wiper mechanism on your vehicle then switch off the ignition once the blades are at their highest position. Remember to squirt the windscreen washer reservoir fluid to avoid scratching the windscreen.

2. Gently pull the arms forward so that each one is at a 90-degree angle. The arm will lock into place with a snap sound once it’s directly perpendicular to the windshield.

3. Turn the wiper blade upside down so that it dangles freely.

4. Find the attachment point and push the tab to remove the blade. Note that some wipers have pin connections so you’ll need to unscrew to claw the pin off. If your car has a different mechanism, follow the instructions on the car’s manual.

5. Place the new blades into position by sliding the hook part of the arm up and pulling the blade until it makes a clicking sound. If your wipers use a pin connector, match the hole on the blade with the pin and screw it in place.

Now turn the blades around into their normal position and squirt your windscreen washer fluid and give them a try.

Tips for Changing Your Windscreen Wipers

• Place towels on your windscreen while you’re inserting the new blade just in case the springs in the metal wiper arms snap back. If it hits the screen, the impact can cause cracks on the windscreen.

• Use one hand to replace the blade while the other holds the rest of the wiper assembly away from the screen.

• Measure both wiper arms separately to ensure you get the best fitting wiper blades.

Inserting ordinary wiper refills is confusing, from finding the right measurement to figuring out the correct mechanism.

If you do find the right ones, you’ll have to work deftly with one hand while holding the metal wiper arm and frame with the other so you don’t accidentally damage the windscreen.

Wipertech has just the solution to save you the headache.

A wiper blade that’s easy to fit—no technical automotive industry knowledge necessary. Plus, you will find the correct size in a few clicks by using our Perfect Fit Guarantee feature. The feature allows you to search for your car’s make and model, so there’s no need to stress about measurements.

All you have to do when replacing the wiper is slide it in and lock it into position, it’s as easy as that.

Apart from being user-friendly, Wipertech blades come with enhanced technology.

Let’s see how Wipertech blades stack up against traditional blades. Wipertech blades come with the following features:

• A pre-tensioned internal steel beam that’s curved for full contact with the glass to ensure maximum efficiency.

• Premium quality natural rubber that comes embedded with Teflon, which makes it wipe smoother with less noise.

• Trademark Aeroflex technology with a sleek aerodynamic design, which lowers wind lift resulting in better high-speed performance.

• A high-precision dual-cut blade that lowers friction means improved performance in extreme weather conditions.

• A corrosion-resistant frameless shape to prevent rusting.

The table below contrasts ordinary wipers vs. the new technology by Wipertech.

Create your account and buy your high tech, durable, and easy to replace wipers from Wipertech to get ahead of the wiper replacement problem.

Your vehicle’s wipers may malfunction because:

• There’s an electrical issue that caused the malfunctioning of the motor or wires.

• They are frozen due to ice or heavy snow.

• The wiper pivot nuts are loose.

• The rubber is torn or worn out.
  

Replace your windscreen wipers with new blades immediately when you encounter any of the following:

• Squeaking noises

• Streaks, smudges or a film layer left on your screen when the wipers move

• Wiper blades are not moving smoothly on the glass

• When you can’t see the road ahead while you’re using wipers

Here’s how you can take care of your blades to make them last longer:

• Scrap off ice with an ice scraper

• Clean your blades regularly with a soft, moist cloth

• Avoid leaving your car in direct sunlight for long periods

• Keep your windshield clean